Connecto IP EVO / 4G Video Panel SIM installation guide

Which SIM does the Farfisa Connecto 4G panel take?

A nano SIM (4FF) — fitted in the panel's 4G module (on some configurations the connectivity comes from a paired 4G router instead, in which case the SIM lives in the router). Either way it's a data connection doing the work on the video versions: check which architecture your kit uses before ordering.

Which network and allowance?

Strongest 4G data at the entrance. Farfisa panels in 316L stainless tend to go on quality installs where a flaky picture won't be tolerated — speed-test at the panel, and fit a multi-network data SIM so the connection holds on the best carrier without revisits.

Fitting the SIM

For the installing engineer, power down:

1. Locate where the SIM sits on your configuration — panel module or companion router.
2. Fit the nano SIM, connect the antenna before power.
3. Set the APN for your SIM provider; configure users and PINs per the manual's remote-management process.

First test

Visitor call through to the phone with video where fitted, PIN entry at the panel, release firing. Verify remote user management works before handover — it's the feature the client is paying for.

If it won't connect

• No data: APN against provider values.
• Router-based kits: confirm the router's WAN shows a mobile connection before blaming the panel.
• Video poor: bandwidth — antenna, then carrier.

FAQ

Panel SIM or router SIM? Depends on the kit configuration — check yours. The SIM guidance is the same either way.

Voice or data? Data on video configurations.

4G or 5G? The range is sold as 4G/5G-capable; 4G coverage is what you'll be using at most UK gates today.